HOME   Off Road Parts

402 ads match your query   1 2 3 4 5 6 → 41Next >

Kenwood TK-790H Race Radio

ID#113869Date posted:Aug 24

PREMIUM LISTING

 $525

  TK-790h 110w

Ring, pinion Mendiola 5.43 for 2D 5 spd

ID#113796Date posted:Aug 23

PREMIUM LISTING

 $200

"Raptor Rods"

ID#113738Date posted:Aug 23

COMMERCIAL LISTING

For Sale  $699.00

2010  Ford F150 & RAPTOR

Ford Bronco Parts and service

ID#113767Date posted:Aug 23

COMMERCIAL LISTING

For Sale  $.

Desolate Motorsports is a full service shop and has been in operation since 2002. We have a retail show room along with a fabrication / install shop on site.
Currently we are promoting some of our Bronco Products. Feel Free to call for further information on our products or services.
Front end:
TTB beam Modifications:
Cut and Turn
Plating and Uniball pivots
Extended from 3" to 5" with new axle shafts
Reinforced beam pivots

Radius arms:
Multiple styles avail:
High clearance, full pate or traditional double tube design. All come with 1 1/4" heim joint pivot, bolt on frame bracket and all Hardware

Steering kits: (currently for in house install only) Double swing set, 1 1/2" .188wall Chromoly tie rods, (8) 7/8" FK Heims, swingers, delrin bushings, grade 8 hardware, weld on frame brackets. Avail for stock or extended front ends.
Options of HOWE hydraulic assist

Other front end options:
Custom front shock mounts
Fiberglass fenders (glassworks or fiberwerx)
Front bumpers
Upgraded motormounts

Rear end options:
Deaver springs built to our specs for 2" or 4" lift heights
Custom Shackle kits for deaver springs
Custom upper shock mounts for 12" race shocks. (Yields 17" travel)

Rear sway bar kits: complete rear sway bar designed around spring over leaf setups with shocks mounted in bound of frame.

4 link suspensions: short course or traditional trailing arm design. Up too 25" of wheel travel (call for details)

Complete Currie rear ends built to our specs. Stock width or widened ,35 or 40 spline Full Floater or Semi Floater. Upgraded brakes, 5/8" studs

We are King shocks dealer and can order you shocks Valved, configured and sized directly for your project. Whether its Coil overs, Bypasses, Internal Bypasses or combinations. We will get you dialed in.

Tires and wheels: Method, XD series, Raceline, BFgoodrich, Toyo, Nitto

www.desolatemotorsports.com
@desolate_motorsports



Lowrance LCX-111c HD

ID#113578Date posted:Aug 18

PREMIUM LISTING

For Sale  $400

NEW outfront 2.5 subaru SOHC

ID#113464Date posted:Aug 15

PREMIUM LISTING

For Sale  $9,500

2016  460hp package

930 Micro stub set up, brakes/hubs/arms/axles

ID#113055Date posted:Aug 13

PREMIUM LISTING

For Sale  $1,500

2006  Desert Dynamics

I'm upgrading my Desert Dynamics to 934 Midboards and boxed rear arms so I have no use for these parts. They are well used but still work perfect. The arms could use a coat of paint or powder coat.

-Desert Dynamics Chromolly Micro Stub trailing arms - 17" center of pivot to center of pivot. The inner pivot tube is 2 1/2" wide. The heims come with the arms but there are no Delrin bushings in the inner pivot tubes. They can be purchased through Kartek to fit your car.

-28 spline CNC Micro stub hubs for 930 CV's (The bearing carrier was replaced by the previous owner 1 season before I bought the car. They have 5 seasons on them and are still tight with no slop or play. I have the old bearing carriers around the garage somewhere...If I can find them I'll sell those too. It's nice to have spare set in the trailer.)

-Willwood 4 piston brakes. No leaks, function perfect.

-300M 28 spline axles. One is 29 3/8" and the other is 29 3/4". I marked the side and direction on them when I pulled them off.

Let me know if you need something measured on the arms or axles.

$1500 for everything. I realize all the parts might not all fit on another car...I will separate them but I'd rather try and sell them all together if possible.


http://www.pacificcustoms.com/cnc643n-cnc.html

http://www.kartek.com/parts/cnc-930-micro-...27d1233575f2194

http://www.kartek.com/parts/3x-6-micro-stu...aring-hubs.html

http://www.kartek.com/parts/300m-930-porsc...xles-29-12.html

http://www.kartek.com/parts/fk-rod-ends-hr...right-hand.html

Pro Lite Rolling Chassis and Ford Raptor Body

ID#113321Date posted:Aug 12

PREMIUM LISTING

For Sale  $5200 Firm

2004  Johnny Greaves Chassis #9

New Rancho Pro Sand Type 1 Transaxle

ID#113278Date posted:Aug 11

PREMIUM LISTING

For Sale  $900

Page 1 of 41 1 2 3 4 5 6 → 41Next >

Control Classifieds

[ Submit New Ad ] [ Edit Ad ]

Favorites

[ List Favorites ] [ Clear All Favorites ]

Search

Keyword:
Depth:
Type:
Days:                  

Feature Ads

Dont Miss "CURT LeDUC's" Off Road Swap meet"
2010 L/T Tundra - Supercharged
Ford Raptor Parts
Lifted Chevy Silverado