easiest way to

[Kritter]

lift a 5 lug 2wd tacoma. Its an 01 extra cab...just want to get 30s on it and make it not drag the arms down bessemer mine road.

2 inch bolt in coilover? Spindle?

Im not a toyota guy...help me out!

[Marshall]

Spindle is a pretty easy fix and should have no problem clearing 30's.

[Kritter]

whats the wheel bolt pattern and do any of the 5 lugs come in a 15 inch wheel? If not..what kind of offset isneeded to clear 30s with stock fenders?

[ThriceGuy]

Both downey and fabtech make a 3" lift spindle for the 5 lug tacomas. As for rims you can run 15x7's with a backspacing of 3.75, thats what I run. Heres my 5 lug tacoma, it can do a little more than just drive down bessemer mine road. http://www.race-dezert.com/vb3/attachments/old/images/graemlins/smile.gif
http://c.myspace.com/00023/09/80/23600890_l.JPG

[DMSCHASE]

Kris - Ask Skyler!!

James

[Kritter]

that a bit too rediculous... I dont need an extra foot of track width! I need 30 inch tires and no rubbing...

[Jerry Zaiden]

Spindles would be the best way to go.Also add a pair of bilstein shocks. But do not beat the spindles to hard.

[Kritter]

thats what I figured JZ...I just need to get it in the air a bit more so when my ol lady comes out to my races seperatly she doesnt hammer the truck which is whats happening now.

[preronner]

fabteck spins 30"tire on 15x7 is what I am running on my taco had to remove the front valens only took two hours to install the spins also installed deaver add a pack to the rear leveled it out nicely my truck is a 97 xcab two wheel drive. http://www.race-dezert.com/vb3/attachments/old/images/graemlins/grin.gif