klaus
May 16th, 2006, 13:06
JMR Tube notcher is the highest quality and most versatile hole saw notcher on the market. It is manufactured from bar stock, not plate, to increase strength and has a 1.125" induction hardened shaft supported by Timken™ bearings. The custom designed shaft seals prevent bearing and shaft damage and the shaft accepts replaceable hole saw mounting threads.
Angle changes can be made easy due to a Timken™ thrust bearing at the pivot point to increase clamping force while reducing wrench pressure. Use it for prototyping or production work.
Capable of notching in a 210° arc
2.5" tube, 2" pipe capacity
Double v-clamp vise allows square to be held flat or corner to corner
Will hold thin wall tube without distortion
May be clamped on tube/pipe to bore holes
Multiple mounting positions
Engraved degrees and stainless steel pointer ensures accuracy
Aluminum bronze acme threaded bushing on clampPrice: $595
For more information on this item, please contact Van Sant Enterprises, Inc. at 877-826-7268 or online at www.trick-tools.com (http://www.trick-tools.com/). Online ordering available!
Angle changes can be made easy due to a Timken™ thrust bearing at the pivot point to increase clamping force while reducing wrench pressure. Use it for prototyping or production work.
Capable of notching in a 210° arc
2.5" tube, 2" pipe capacity
Double v-clamp vise allows square to be held flat or corner to corner
Will hold thin wall tube without distortion
May be clamped on tube/pipe to bore holes
Multiple mounting positions
Engraved degrees and stainless steel pointer ensures accuracy
Aluminum bronze acme threaded bushing on clampPrice: $595
For more information on this item, please contact Van Sant Enterprises, Inc. at 877-826-7268 or online at www.trick-tools.com (http://www.trick-tools.com/). Online ordering available!