5.0 conversion?

[EPiC_JAMES]

i'm going to be dropping in a 5.0 mustang engine, into my 88 ranger. does anyone have any info on the swap? or any other reccomendations? thanks.

[TeenyCar]

Tim at Bronco Alley does a lot of those conversions. You might wanna talk to him. 310 429 0207 Located in Gardena. He uses the factory harness so if you have a problem you can use a stock manual. Very nice setup.

[EPiC_JAMES]

nice, thanx for the info.

[doctorboost]

try James Duff enterprise, he makes swap kits for both small and big blocks into rangers, but go with the L&L headers they are sick.

[sickrick]

Check out: www.therangerstation.com

Alot of good ranger swap info.

[SimonSays]

you can get a stand alone and stock 5.0 wiring harness from summit.http://store.summitracing.com/partdetail.asp?autofilter=1&part=FMS%2DM%2D12071%2DC302&N=700+115&autoview=sku

[MH20]

www.torquemonsterheaders.com for the swap headers, they are really nice...I have a set for my upcoming conversion.

People have seemed to have pretty good luck with the L&L motormounts if you don't want to make your own.

[SimonSays]

Is this going to be a 2wd or 4wd? stock firewall? What trans(auto or stick)? Is the Dash staying? Is it to be street legal? Smog??????? Do you have A/C because that has to go(unless you know how to make your own heater/ A/C ducting and condensor)
more info would be nice.