PDA

View Full Version : More wheel stud Q's


partybarge_pilot
November 30th, 2006, 13:01
Looking for the shouldered 11/16 with 5/8-18 thread, Trying to match some in rear full floater hubs. Can't remeber where I got the ones that are currently in the hubs........
scottm
December 4th, 2006, 11:19
Here is the dorman catalog-

http://www.dormanproducts.com/catalog/hardware2006/137-142_Sec10_Part2.pdf
scottm
December 4th, 2006, 11:22
Oops, here is the 5/8 section:

http://www.dormanproducts.com/catalog/hardware2006/155-160_Sec10_Part5.pdf
partybarge_pilot
December 4th, 2006, 12:42
YEah, I already looked through there. They don't have any shouldered ones. I know Jayson at Tubeworks has them, Now if I can just get him to call Me back.....
Jason Hughes
December 4th, 2006, 14:06
Jayson at tubeworks does carry them. I know in a pinch Jayson has got them from Kartek. They do have a little bit longer shoulder on them so depending on the hub and wheel combo you might have to run a washer. PM me if you need more help.
Tony_Barraza
December 5th, 2006, 14:44
Looking for the shouldered 11/16 with 5/8-18 thread, Trying to match some in rear full floater hubs. Can't remeber where I got the ones that are currently in the hubs........

Brian-

Call Doug Jansen at Parker Pumper. They are a great resource for more "hard parts" than they are given credit for. They carry much more than just helmets and harnesses.

Tell him Tony B. sent ya!

Good luck!