Ranger 2001 Tire Fitment

[Salvador]

A want to put some 3" lift spindle on my 2001 coil spring Ranger (Non Edge), and want to now if I can put some 32" tires on it or did Im limited to put 31"?

Also dont now what brand spindles to put on if Fab Tech's or Doetsch Tech's?

[zipperhead]

On my o6 I ran 31 BFG Muds on the front w/ barely any rubbing & 32's on a exploder disc brake 8.8 out back w/ some Boatec prolite bedsides w/ no lift front or back.....looked cool, kinda stadium style, keep in mind that the right bckspacing up front may/may not help you.

[SimonSays]

No matter what tire size you go with, when the tires are off of the truck take a hammer to the firewall and clean it up so there are no sharp edges you can normaly clean it up to clear bigger tires, I don't know if you can safely hammer it far enough to clear 32" tires but its worth a try.

[Mikey]

You can run a 32 but don't take it off road with the stock fenders. Here is my old 2000 with H&M spindle (1.5" wider per side) Glasswerks fenders and 33x10.5 BFGs. Never had any problems. I would get the Camburg a-arm/spindle combo. It will ride/handle way better. The second pic is with the Camburg kit and Deavers

[Salvador]

Thanks a lot for the info. Im looking forward to lift my truck with out frontfiberglass fenders for this time.