Brakes - What's the secret?

[Iggle]

I got hard line from the master cylinder all the way to the rear calipers. The rear feels really mushy. The front has a 2 or 4 pound residual valve on it. I think that's what you call it. How do i get better brake feel out of the rear? I think the bias is set more towards the front but you can tell the rear cylinder goes in way more than the front and the pedal feels mush.

[DSRacing]

Probably help if you gave some more info, vehicle / OEM or aftermarket system / new install? Lastly, not that I doubt your abilities, but have you completely bled the system of air?

I know with the combination of CNC masters and Wilwood calipers, I have to get every last bit of air out of the system before the pedal stops feeling mushy.

[ASHCRAFT]

Maybe a bad master cylinder. If its a CNC system try rebuilding it.

[Iggle]

Probably help if you gave some more info, vehicle / OEM or aftermarket system / new install? Lastly, not that I doubt your abilities, but have you completely bled the system of air?

I know with the combination of CNC masters and Wilwood calipers, I have to get every last bit of air out of the system before the pedal stops feeling mushy.

Baja Shop Truggy. I think it's a CNC system and yes they have wilwood calipers. I have not bled the air system totally on the back because the little nipple is stripped so i gotta get a new one. I know i should start there but i was just wondering if there was anything i was missing.

[DSRacing]

There you go, replace that bleed screw, get ALL the air out and it should be fine. If it's still mushy after that, rebuild the MC's.