wheel stud help

[Ryan B]

hi everyone!
i just got a set of camburg 4X4 extened beams...
my problem is my stock wheel studs are too short for my new rims.
the local napa can't help me i was there for almost an hour... nada

so i'm asking... where do you guys that are running dana 44 hubs on your twin traction beams get your longer wheel studs.

thanks :)

[MH20]

Desert Specialties makes some nice 5/8" ones that we are running on our truck.

[tre5]

Napa bulk amp part #641-1608 is a 5/8" fine thread x 3" long wheel stud. There are several types of nuts for these studs in the same bulk amp catalog. If you need, I have the part number for the 1" hex, tapered nuts.

[Ryan B]

Napa bulk amp part #641-1608 is a 5/8" fine thread x 3" long wheel stud. There are several types of nuts for these studs in the same bulk amp catalog. If you need, I have the part number for the 1" hex, tapered nuts.

thank you!! life saver..

[tre5]

hey thats why rdc has reputation points right?

[partybarge_pilot]

Note, those are larger Diameter than stock studs and may not fit your rims without drilling. Stock studs are 1/2-20.

[gunit]

ARP makes hardened 3" studs that are 1/2" x 20 and will fit your truck and wheels without modification. While they are not as strong as the 5/8 studs they are rated at 190,000 psi and much stronger than stock. You can get them from Summit.