Custom camshaft for restrictor plate SBC?

[Billy_the_Kid]

Does anybody have any suggestions for where I can get a good custom ground camshaft for a 350 SBC running a restrictor plate and a 2-barrel?

I am building a short course Sportsman Stock ’99 Chevy Truck for the CORR Lucas Oil Series and would like to run something other than an off the shelf “Comp” or “Crower” camshaft. I need to find a cam grinder that has experience with restrictor plate engines that I can actually talk too. When I call Comp, their technicians are looking at a computer screen and picking cams from a menu, not what I’m after.

In our class we have to run a 2-barrel with a restrictor plate, on a 4150 lb. truck with an automatic trans, so I know the cam is key to everything. Does anybody on this board have any experience with plate motors?

Thanks in advance for the help.

<font color=orange>”I know you believe you understand what you think I said, but I’m not sure you realize that what you heard is not what I meant.”</font color=orange>

#817 CORR Stock


Bill Schmitt

[partybarge_pilot]

Schnider racing cams in San Diego. They've been doing cams for restictor plate roundy-round cars for about thirty years. Sounds like a bommer stock kinda cam.

[Bryan_D]

Definately a Schnider they are sweet for whatever kinda racing. My buddies run them on Fastest streetcar shootout cars and they work sweet.

[Donovan]

The best cam grinder I have found is Elgin Cams. www.elgincams.com They helped us out more than any other company out there and I have tried them all. Talk to John and give him every bit of info you can and Cylinder head flow numbers if you have them.

Donovan

[Ryno]

I'd go to Schneider first...if they don't work..go to Crower. They are in San Diego (Chula Vista), and their customer service is great. I'm a big fan of theirs because they have never done me (or friends) wrong.

Ryno

Build it like a Rhino, and Leave it be.

[Billy_the_Kid]

Sounds good, now how do I get ahold of Schneider? Do they have a website? Anybody have a phone # for them?

<font color=orange>”I know you believe you understand what you think I said, but I’m not sure you realize that what you heard is not what I meant.”</font color=orange>

#817 CORR Stock



Bill Schmitt

[partybarge_pilot]

1-619-297-0227

[bajaruner11]

Billy_the_Kid just go to www.schneidercams.com. Ask for Jerry when you call, he's a great guy. My personal preference is Engle cams, I've found a little more HP there. You can give them a try to at www.englecams.com you'll talk to either mark or doug. Either way you can't loose both company's make a great product!