trimmed front end

[Vance_Miller]

I have a baja bug with a one piece front end and im about to cage it and i wanna trim the front glass up pretty good so it doesnt look so stock. anyone have any tips or any pictures for me?
-thanks

[baja619]

Tape it off to simulate cut lines and trim marks. This way you can get a bit of perspective before you actually cut into it.

[Matt D]

Tape it off to simulate cut lines and trim marks. This way you can get a bit of perspective before you actually cut into it.

thats what i did

sorry no pics of the proses tho


http://i278.photobucket.com/albums/kk84/MattD-36/071013_124856.jpg

[Vance_Miller]

thanks guys, Matt that was pretty close to what i was picturing in my head. guess ill just have to bust out the tape and se what it leads to :)

[truck poor]

The taping method works great for creating "body lines." just to add, I use 1/8 " tape to make rounded corners it's easy to bend in the direction you want it to go. Also when you get your line the way you want it you may want to use some masking paper, lay it on the fender, cut paper on the tape line and now you flip it over and you will have the same lines on both sides. You might have known this trick but thought i'd throw it out there just in case.

[Vance_Miller]

thanks! ill try to get some pictures on here once i get it done, and also with the new cage