Dsuz Spring / Button Length?

[idealer]

What is the standard dzus spring / button for holding aluminum panels with tab mounts

[Shazaam]

for use with .063 material, you can either use a 375 spring with a 500 button, or a 425 spring with a 550 button. If you going to powder coat the panels you might want to use the 375 springs with a 550 button, that way they'll fit right with the extra thickness. There are alot of different springs and button lengths but these are most common, a 375 spring is fairly safe to go either way, and if you have to go through a double panel you can use a 600 button too. hope this helps.

[idealer]

Thats what I needed thx