PDA

View Full Version : 5.0 with C4



gcddarren
January 2nd, 2009, 10:33
what temps should the water and oil run at??? our race day at the dash was ended very quick because of water temp!

1450-ranger
January 4th, 2009, 13:19
Our 5.0 doesnt get over 215. We have a large alum. radiator and also run 2 Flexilite Elec. Fans the whole time, no matter what the temp. The fans are fully shrouded.

Heres a few photos

http://i76.photobucket.com/albums/j14/khsracer16/DSC02333.jpg
http://i76.photobucket.com/albums/j14/khsracer16/SANY0128.jpg

gcddarren
January 4th, 2009, 13:55
215 on hard pack is what we are running, but pops up on in a sand wash. at the dash we had our water temp up to 250 and same as the oil. we had to stop and limp around the track just to get a lap in.

1450-ranger
January 4th, 2009, 19:42
215 220 is the hottest it will get in the sand washes. This was testing in August in Barstow. Were running EFI so truck should run a bit better, well see. It will stay at 175 - 180 in all normal, hardpack conditions.

My trans' sender was not working properly so no help on the temps there.

gcddarren
January 4th, 2009, 21:17
we got our tranny built by cuhlhane in lake elsonore and it runs around 150 to 170 max. we have 2 fluidine double pass coolers and ran the same tranny for 5 races now and have not had a problem yet. the last place we took it beforee that it got roasted in 20 miles. i suggest taking it to him. we are going to put a high voloume water pump in this week and plan on taking it out in 2 weeks to see if we fixed the problem.