Bonding Fiberglass to metal???

[atomicjoe23]

This could be a stupid question. . .but bear with me, I'm new to bodywork. . .

Fiberglass can be bonded to sheetmetal bodywork correct?

If so, what is the best way to do this? i.e. what adhesive would you recommend?

I have a '79 F-150 and noone makes any of the louvered and scooped hoods for it, but the louvers and scoops are available separately as an add-on components from several companies. . .I plan on cutting holes in the sheetmetal hood and using a pneumatic flanger to flange the cut out and then bond the fiberglass scoops and louvers to the sheetmetal hood flush, and fill the gaps with filler, sand smooth, and paint. . .

I know that I could rivet them to the hood flush or on top, but I would still be stuck with the rivets and a flush mount without rivet heads would look much better and cleaner.

Thanks!

[Wild bill]

jb weld?

[RocketMan]

I used 3M pannel bond adhesive to mount my bed skins to my truck..no screws or bolts hold my skins on its great..



http://solutions.3m.com/wps/portal/3M/en_US/3MAutomotive/Aftermarket/Products/Product-Catalog/?PC_7_RJH9U5230GE3E02LECFTDQCEK3_nid=5G2DT12RRHbeP 14FZGJL4Zgl

[baja619]

rivit / resin / bondo to smooth everything out and over.
CHA - CHING

[desertspeed]

Try looking into Sikaflex- I know a lot of the custom RV builders use it in their construction.

[johnnyweb]

I have Owned, Operated and performed auto body repairs for 25 years. Go with the 3m or equivalent structural bonding adhesive. I recommend either 3m #8115 or #8214. Very strong stuff! don't even go there with jb weld, resin, bond etc.

[atomicjoe23]

Thanks desertspeed and johnnyweb. . .sounds good to me!

[atomicjoe23]

This looks to be the stuff from Sikaflex. . .used in critical marine fiberglass bonding applications so it has to be good stuff!!!

Sikaflex® -292

"Sikaflex®-292 is a one-component, thixotropic, high modulus, structural, polyurethane-based adhesive system. The product is used for a wide range of bonding applications, deck-to-hull bonding and bedding of chainplates, through-hull fittings and toe rails. A high viscous, high strength adhesive, Sikaflex®-292 can replace rivets, screws, welds and other mechanical fasteners in building and repairing boats of all types. This remarkable product is designed for use on a wide variety of marine substrates. It seals and bonds in one step."

I'm also gonna look into the two 3M products you recommended johnnyweb. . .