9" Pinion Flange

[philofab]

I need a 9" pinion flange that has a 4.25 bolt circle... I bought one off of a 80s ford van but it has a 3.50 bolt circle. I've been searching around and not had any luck. I'm using it with a standard 9" pinion (28 spline) and a Daytona bearing. This is for use in my 93 Bronco so I can use stock drive shafts.

Any leads/ideas?

[FabioP]

Try Strange Engineering.

[skullver]

http://www.highangledriveline.com/

should have it, good luck!

[philofab]

http://www.highangledriveline.com/

should have it, good luck!

No bueno...

I'm just going to have to machine one myself.