4wd Fully-Fabricated Spindles for 96-04 Tacoma/00-06 Tundra/96-02 4Runner

[Solo Motorsports]

4wd Fully-Fabricated Spindles for 96-04 Tacoma/00-06 Tundra/96-02 4Runner.
Solo Motorsports is in the final stages of completing our 4wd spindles. These spindles are very similar to our fully fabricated 2wd / 3” lift spindles. We created this spindle to take the abuse that would normally break a factory spindle. No more broken uprights at the upper ball joint area. There is no lift or increased width built into this spindle because of the 4wd axle. This design will also have to ability to upgrade to the 1” Uniball/Steering Knuckle Conversion. Running this conversion solves the issues of broken tie rod ends and lower ball joints pulling through the LCA. Another option available with our 4wd spindle is the ability to upgrade to a manual locking hub. These spindles do require the use of an aftermarket UCA with a 1" Uniball.

If you have any questions, please CALL as these are not on our website yet.
Call M-F 9am-5:30pm pst @ 626.966.7656 or E-mail [email protected]

We are already taking PRE-ORDERS. We will accept PRE-ORDERS until 2-29-2012. PRE-ORDERING WILL SAVE YOU MONEY!!

Estimated release date of our second run...3-31-2012

We are offering the 4wd Spindles at the PRE-ORDER price of $1350.00.
After 2-29-2012, the 4wd Spindle will have an MSRP of $1525.00.

4wd Model Fitment:
96-04 Tacoma
00-06 Access-Cab Tundra.
96-02 4Runner

Features:
Rids your truck of common broken spindle issues
Indexed interlocking plates
Ability to upgrade to our 1” uniball/steering knuckle conversion
Ability to upgrade to manual locking hubs

[SPONSOR]

Membership in the largest desert racing community has its advantages - Participate in Forum Discussions - Send and Receive Private Messages - Maintain Public Photo Albums - Access to Groups - User Profile in our Social Network - Increased Access to more Sub Forums - Reduced Online Advertisements Join our community today