Rims? Ready to go for 5/8" studs and large lugs

[NorCal_Prerunner]

Ok, so the smallest, stupidest things can really be the biggest pain in the ***. Here's the question. Who makes a (15x8 rim) 5 on 5.5, ready to bolt up to 5/8 studs, with the large nascar style lugnuts? The rims I have are great rims from a reputable manufacture, but require much machining to get them to work, which includes maching into the center bore of the rim. I am going to run them, but was still curious who makes rims ready to bolt up. Thanks in advance.

[SPONSOR]

Membership in the largest desert racing community has its advantages - Participate in Forum Discussions - Send and Receive Private Messages - Maintain Public Photo Albums - Access to Groups - User Profile in our Social Network - Increased Access to more Sub Forums - Reduced Online Advertisements Join our community today

[motoxscott]

I've heard you can get Outlaw 2's from american racing already machined for 5/8" studs and clearanced for the larger socket.

[hoeker]

jim conner has american racing wheels already converted to beadlocks and they are available race drilled and spot faced for the large lug nuts. i ran these until i switched to the 16" toyo tires.

[John_Bitting]

Protruck sells exactly what you are talking about.

[Chris_Wilson]

I think the rims ProTruck sells are drilled for 11/16 studs, not 5/8 studs.

[John_Bitting]

Well then please ignore my post. Thanks for the clarification

[CEORanger]

anybody know where you can take rims you already have and get this done in the OC area ?

[PBR]

i don't know if they are still in business but you can give them a try... we had some wheels drilled out by them a while ago... they are right near mckenzies.

tech 1
714.630.8722

[DMSRACE]

Tucker Tire in Covina...talk to Scott, he does all of ours....626-332-1142

[Dezertpilot]

Uh can't u just put the rims on a drill press with a larger drill bit?
I was at DMZ Tim's house and he was drilling out Pat Kapko's lug holes for the bigger studs 5/8's I believe but now if u are also talking about getting the center opening opened up then yeah u should leave that to a reputable shop. Just my two cents.