Advertisement
Page 1 of 2 1 2 Last
Results 1 to 10 of 14

Thread: Nissan 240 race car roll cage(caution lots of pics)

  1. #1
    Prospect rocofab's Avatar
    Join Date
    Jan 2010
    Location
    Ireland
    Miles
    38

    Nissan 240 race car roll cage(caution lots of pics)

    This is a full roll cage i fab'd for a important customer, its a Nissan 180sx, or 240sx as you call it in the US, its being built mainly for drifting but the customer wanted the car built to comply with all regs, its made out of aviation grade cold drawn true seamless carbon steel. seriously strong stuff. the main cage is 1 3/4 or 45mm x 2.64mm. and the brace bars and door bars are 1 1/2 or 38mm x 2.64mm. its not 100% finnished yet. theres two bars to go down the rear trunk lid pillars, and the main hoop diagonal, side impact and harness bars need to be added. he's a tall guy so i made the cage as tight as possible to the chassis, and you cant get much tighter than toutching. i also bent the two sill bars below the x door bars for a better fit.
    it all mig welded on my sip 240, overall im prety happy with it,



































































    "Racing is life. Everything else that happens before or after is just waiting." ~Steve McQueen [Le Mans -1970]

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Miles
    Many

    Membership in the largest desert racing community has its advantages

    - Participate in Forum Discussions
    - Send and Receive Private Messages
    - Maintain Public Photo Albums
    - Access to Groups
    - User Profile in our Social Network
    - Increased Access to more Sub Forums
    - Reduced Online Advertisements

    Join our community today

     

  3. #2
    Rookie
    Join Date
    Jan 2010
    Location
    Perth .WA
    Miles
    3

    Re: Nissan 240 race car roll cage(caution lots of pics)

    Nice work!! Where abouts in Ireland are ya from? I am from Athlone.

  4. #3
    Prospect rocofab's Avatar
    Join Date
    Jan 2010
    Location
    Ireland
    Miles
    38

    Re: Nissan 240 race car roll cage(caution lots of pics)

    thanks ,from newbridge in kildare. small world huh
    "Racing is life. Everything else that happens before or after is just waiting." ~Steve McQueen [Le Mans -1970]

  5. #4
    Accepted ranger2339's Avatar
    Join Date
    Nov 2009
    Location
    Stuck In Minnesota
    Miles
    249

    Re: Nissan 240 race car roll cage(caution lots of pics)

    I dont think this cage is FD or D1 legal, I may be wrong? Is he driving in any of the Pro series?

  6. #5
    Prospect rocofab's Avatar
    Join Date
    Jan 2010
    Location
    Ireland
    Miles
    38

    Re: Nissan 240 race car roll cage(caution lots of pics)

    why not? yeah will be in the european series.
    "Racing is life. Everything else that happens before or after is just waiting." ~Steve McQueen [Le Mans -1970]

  7. #6
    Accepted ranger2339's Avatar
    Join Date
    Nov 2009
    Location
    Stuck In Minnesota
    Miles
    249

    Re: Nissan 240 race car roll cage(caution lots of pics)

    I haven't got a hold of the new 2010 rule book but the last years and years before state this.

    "No portion of the cage may permeate the firewall and shall be fully contained within the occupant’s compartment."

    This is for Formula Drift USA, not sure if its different for the Euro series.

    Josh

  8. #7
    Prospect rocofab's Avatar
    Join Date
    Jan 2010
    Location
    Ireland
    Miles
    38

    Re: Nissan 240 race car roll cage(caution lots of pics)

    yeah that could be so, the cage was built to FIA Rally/road racing regs, as the customer
    wanted to be able to compete in hill climbs and track racing too, and it surpasses all drifting regs here by a mile. i must check out the 2010 fd regs again as i didnt notice that, thanks
    "Racing is life. Everything else that happens before or after is just waiting." ~Steve McQueen [Le Mans -1970]

  9. #8
    Accepted ranger2339's Avatar
    Join Date
    Nov 2009
    Location
    Stuck In Minnesota
    Miles
    249

    Re: Nissan 240 race car roll cage(caution lots of pics)

    Ok so I just got off the phone with a guy who's in the know and he said you should be all good, the rules are "open to interpretation" ha. I guess as long as its safe and that looks WAY safe.

    May I ask who the driver is?

    Good work bro.


    Josh

  10. #9
    Prospect rocofab's Avatar
    Join Date
    Jan 2010
    Location
    Ireland
    Miles
    38

    Re: Nissan 240 race car roll cage(caution lots of pics)

    wesley keating, hes a up and coming irish driver, did quiet well last year in ireland, europe and britain. one to look out for this year.
    "Racing is life. Everything else that happens before or after is just waiting." ~Steve McQueen [Le Mans -1970]

  11. #10
    Accepted ranger2339's Avatar
    Join Date
    Nov 2009
    Location
    Stuck In Minnesota
    Miles
    249

    Re: Nissan 240 race car roll cage(caution lots of pics)

    Awesome!

    This guy?

    [nomedia]http://www.youtube.com/watch?v=KkBnpu6p6ZY[/nomedia]

Similar Threads

  1. Toyota cab cage in Nissan
    By MobTech Photo in forum Shop - Fabrication
    Replies: 2
    Last Post: September 10th, 2009, 08:54
  2. MDR Night race pics (225 pics CAUTION!)
    By .CAL.Photo. in forum Desert Racing
    Replies: 18
    Last Post: August 15th, 2006, 21:01
  3. Nissan cage progress
    By Crashbig in forum Shop - Safety
    Replies: 19
    Last Post: July 5th, 2003, 17:29

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •