I just changed the seals on one leg of my forks (yeah, yeah, i know im supposed to do both at the same time). When I went to add the fork fluid, i only had 15w at hand so I used that. As you might imagine my forks were super stiff. So I drained the fluid today and replaced it with 5 w. They are still as stiff as before though.
Does anyone know why this might be. I didn't flush/purge the "old" 15w, i just drained it. Is it possible some of it within the chambers might be causing this? or did I just screw something up?
Thanks in advance.
btw, my fork internals are almost identical to this: