torque for 22RE timing cover, H20 and oil pump

Discussion in 'Shop - Miscellaneous' started by pphat, Jun 27, 2004.

  1. pphat

    pphat Member

    Joined:
    Jun 19, 2003
    Location:
    San Francisco, CA
    Just conaned the head off a bolt for the water pump I'm putting on the 22RE in my 4runner. It occurs to me that a) since I don't need the engine tonight and b) I actually own a torque wrench, I should c) find out the proper foot pounds to torque the bolts for the timing chain cover, oil pump and water pump for an 86 yota 22re.

    Anybody have a shop manual they could look those numbers up in?

    Wanna sell it? [​IMG]

    thanks!
    P
  2. BIG_FAT_LOSER

    BIG_FAT_LOSER Active Member

    Joined:
    Apr 5, 2001
    Location:
    Phelan, Ca
    As per Chiltons

    timing cover 8 mm bolts 9 ft lbs, 10 mm bolts 29 ft lbs
    oil pump 14 ft lbs
    water pump 27 ft lbs
  3. pphat

    pphat Member

    Joined:
    Jun 19, 2003
    Location:
    San Francisco, CA
    Thanks!!!!

Share This Page