Uploading BITD map onto 540C

Discussion in 'Shop - Electrical' started by bajaxp, Apr 25, 2011.

  1. bajaxp

    bajaxp Baja Bobsled Team

    Joined:
    Nov 9, 2006
    Location:
    Newport Beach, California
    Sorry for the stupid question, but I would like to know the step by step proceedure for uploading the BITD SS300 map from the sd card to my 540c. My co-dog typically does this for me, but he is not riding with me at this race.

    Any help would be appreciated.

    MP
  2. racer56

    racer56 Well-Known Member

    Joined:
    Sep 10, 2007
    Location:
    Encino, Ca
    Step# 1-Go to PCI trailer@ contingency.
    Step# 2-Pay for race download including dangers.
    Step# 3-Watch PCI install it on your gps.
    Step# 4-Have a beer and enjoy contingency.
    1 person likes this.
  3. bajaxp

    bajaxp Baja Bobsled Team

    Joined:
    Nov 9, 2006
    Location:
    Newport Beach, California
    Bump for help
  4. racer56

    racer56 Well-Known Member

    Joined:
    Sep 10, 2007
    Location:
    Encino, Ca
    1. Insert the MMC into your unit. Press MENU|MENU|↓ to SYSTEM
    SETUP|ENT|↓ to TRANSFER MY DATA|ENT and the screen below appears.
    2. The Transfer My Data menu includes a message which tells you if an
    MMC is present or not. If no MMC is present, you must first insert a
    card into the unit in order to activate the Load or Save commands.
    To transfer data from the unit to the MMC: press ENT (for SAVE.)
    To transfer data from the MMC to the unit: press → to LOAD|ENT. 59

    Transfer My Data highlighted on System Setup menu (left). When
    transferring data (right) you will have the option of transferring the
    unit's data to a MMC card or loading the data on the MMC card into
    the unit.
    3. Saving to MMC: To accept the default name "Data" for the GPS
    Data File, press ↓ to SAVE DATA|ENT. If you want to rename the file (as
    shown in the following figures), press ENT to activate the selection box.
    Press ↑ or ↓ to change the first character, then press → to the next
    character and repeat until the name is correct. Then, press ENT|↓ to
    SAVE DATA|ENT.

    These figures (left to right) show the menu sequence for naming and
    saving a GPS Data File from the unit's memory to an MMC.
    The unit will display first a progress message followed by a completion
    message when the data transfer is finished. To return to the Page view,
    repeatedly press EXIT.
    4. Loading to unit memory: There may be more than one GPS Data
    File (*.USR) on the card. To select a file, press ENT to activate the selection box, use ↓ or ↑ to highlight the file, then press ENT to accept the
    selection. Next, press ↓ to LOAD DATA|ENT. 60
    The unit will display a completion message when the data transfer is
    finished. To return to the Page view, press EXIT repeatedly.
    1 person likes this.

Share This Page