Search results

  1. outlaws4x4

    Lowrance GPS -Guide

    Hi can anyone point me in the direction for a guide on how to use the lowance gps for offroad racing applications. Iv just purchased a HDS-7" Carbon as the rules here in Australia have just changed to allow us to use gps to navigate during a race and i am looking to find some info on the best...
  2. outlaws4x4

    Steel it or powder coating

    Right guys n girls Steel it's been around long enough now to get a good comparison so I would like an un biased results please. What is better and why, steel it or powder coating? Which holds up better for longer?
  3. outlaws4x4

    3.75" coil spring OD

    Hi I am trying to find out what the Outside diameter of a 3.75" coil spring is. can anyone help by measuring one of there's?
  4. outlaws4x4

    HELP!!!! FOX 4.0 & 4.4 Byapass CAD files

    I have emailed Fox but have not heard anything back.
  5. outlaws4x4

    HELP!!!! FOX 4.0 & 4.4 Byapass CAD files

    If anyone can help with the following dimensions it would be greatly appreciated.
  6. outlaws4x4

    HELP!!!! FOX 4.0 & 4.4 Byapass CAD files

    Hi guys iv have looked high and low and i cant find a cad file for a FOX 4.0 and 4.4 Bypass shocks. i don't have access to any either otherwise i would just draw them up. i am currently finishing off the design for my new trophy truck and i need the dimensions for correct fitment in the new...
  7. outlaws4x4

    Reverse intake manifold on LS

    Hi i am looking to run a reverse intake manifold on my ls2 what problems should i expect? what is the solution to the valley plate and oil pressure sender? thanks Ash
  8. outlaws4x4

    Team Outlaws4x4 - Australian 4wd Trophy Truck - Aussi Class 8

    Hi this is my Aussi class 8 race truck. Its a 4wd Ford Raptor running a Twin Traction Beam Front end. Its got 19" of travel in the front and 28" of travel in the rear. I have only done 2 races in it and im still fine tuning it. It took me 4 years to build myself. you can follow me and the team...
  9. outlaws4x4

    Pirtek Three Springs -Live from Western Australia From 8pm pacific time

    The Last round of the Western Australian Offroad racing series is on today. For the first time they will be broadcasting a LIVE STREAM of some of that action. The Pirtek Three Springs 330 is a 330km race or about 205 miles. It is held in the small township of Three Springs which is about 350km...
  10. outlaws4x4

    Custom length Dana50 ttb axles

    Well this is their response...... "Hello, sorry we do not have this product developed. We have not been able to develop the 2pc on the long side. Sorry we can't help you out. Kraig"
  11. outlaws4x4

    Custom length Dana50 ttb axles

    No i have asked RCV and they told me that they are not making them and cant help me.
  12. outlaws4x4


  13. outlaws4x4

    Custom length Dana50 ttb axles

    Hi i need to get some custom length dan50 ttb axles made. Can anyone help me on where or who might be able to do this??? If no one makes custom length dana50 axles has anyone fitted dana60 axles into a dana50ttb before? and what is required to make it fit. Thanks Ash
  14. outlaws4x4

    TTB coil over spring rates.

    Well iv decided to make a few changes but i have come up with 400/600 for the front and 500/750 for the rear. will wait and see how that works. cheers
  15. outlaws4x4

    TTB coil over spring rates.

    FYI the i got the info from for what D1 and D2 ect are.
  16. outlaws4x4

    TTB coil over spring rates.

    Hey guys, was hoping you could help me out with my spring rate calculations. My 3 year build is finnaly at the end and one of the last things to do is order the coils. So heres what i have. Its pretty heavy total weight with fuel,driver and Navi is 5300lbs. 16x2.5" coil overs on all 4...
  17. outlaws4x4

    best palce to get floater axels

    Hi iv just had a custom ford 9" housing made with dana 60 outers. I am running 35 spline dana 60 drive slugs and a 35 spline 9" spool. i am pretty sure the spline angle is the same for both. Can anyone confirm this for me and recomend a place to have my axels made. they are quiet long 41.375"...
  18. outlaws4x4

    Help with ball joints on a IFS Dana50

    Thanks Ramsey you have been a big help.