Search results

  1. 8

    Auto Insurance

    I had geico cause I thought it was the cheapest, I just switched to AIG and saved $150 for the six months. I also recently had my first accident and AIG handled it very nicley. I had a check for the amount minus the deductable a week and a half later.
  2. 8

    New forum talk

    Two quuick questions- How do you "show all" so you see the entire thread at once? Can you respond to a specific post?
  3. 8

    really stuck bolt!!!

    Yep, stock 14mm. Ended up holding the front end with vice grips (side with head ground off) and using impact wrench to tighten down nut to back the bolt out which worked untill I ran out of threads. Then I started drilling the bolt out from the front and was finally able to knoched it out with...
  4. 8

    really stuck bolt!!!

    finally
  5. 8

    really stuck bolt!!!

    I was hitting the threaded end of the bolt, thats why the nut is on there. (It was threaded on the end, it vibrated down when i used the air hammer on the othe side.) I ground off the head because I could not get a clear shot at the threaded end of the bolt as you can see from the picture...
  6. 8

    really stuck bolt!!!

    I running out of ideas here. I'm to the point where I'm thinking about taking off the upper ball joint so I can lay the spindle down and hopefully have enoung room to chop the bolt off on the back side as well. At this point the bolt has absolutlely no presure on it from the car at all. I can...
  7. 8

    really stuck bolt!!!

    Wel,l tried the air hammer, didn't really do anything but make a mess. Although a think the bolt might have moved a hair
  8. 8

    really stuck bolt!!!

    I was thinking about that, don't have one but this would be a great excuse to get one.
  9. 8

    really stuck bolt!!!

    Oh yeah, first thring I tried was the impact to back it out, worked great on the other side, didn't even have to relax the spring on that side. Thanks for all the suggestions guys, this is really starting to get annoying
  10. 8

    really stuck bolt!!!

    Trucks off the ground, jackstands are on frame. Top of coilover is loose, I even relaxed the spring and let out the nitrogen. There is no preasure on the bolt from the truck or the coil, I can even wriggle it around a little up and down. I have a specially designed tool to place on the end of...
  11. 8

    really stuck bolt!!!

    Heres the second picture. It's from the front with the ground off bolt head, You can see the heim all screwed up inside.
  12. 8

    really stuck bolt!!!

    I have been trying for the past two hours to get this bolt out. Other side came out no problem. It's the lower mounting bolt on the drivers side saw coilover on my tundra. I was hitting it from the back on the nut and it didn't move at all, so eventually I ground off the head so I could really...
  13. 8

    weird I-beam idea

    Heres the thread to Bob Sheaves stuff, don't think it is the same as "upper a arm lower beam" http://www.race-dezert.com/ubbthreads/showflat.php?Cat=&Number=19755&page=&view=&sb=5&o=&fpart=1&vc=1 Heres another one with a picture...
  14. 8

    Car Audio

    you could just use a FM Modulator. click
  15. 8

    Refreshing moment

    SB. I took it from the cliffs at the edge of Isla Vista. That's coal oil point.
  16. 8

    Refreshing moment

    Last one.
  17. 8

    Refreshing moment

    one more
  18. 8

    Refreshing moment

    another
  19. 8

    Refreshing moment

    heres a few from around santa barbara
  20. 8

    MDR RACE

    Carrier baring, tried to fix it with a tie down but it didn't last.
Top