Search results

  1. MH20

    1993 Ranger EEC pinout

    I would suggest the Factory EVTM (Electrical & Vacuum Trouble Shooting Manual). You can get them on ebay for $10-20. They have the pinout of EVERY connector on the truck. **EDIT...
  2. MH20

    Where to get raw round bar stock polyurethane. . .

    How many bushings do you need? And/or what are the sizes of the bushings that you need to make?
  3. MH20

    Off road wheelchair!?

    There are a variety of companies that make "Beach Wheel Chairs". A quick google search will turn up a variety of options and prices.
  4. MH20

    Blitzkrieg Dana 44 TTB spindle upgrade?

    From what I've read/heard, the stock D44 upright is the weak link in that whole package and pretty much anything is stronger than it. And no, I moved back up to Orange County for work.
  5. MH20

    Blitzkrieg Dana 44 TTB spindle upgrade?

    Andy, we have the 2WD ranger to D44 spindle and they are an amazing piece of work - very similar to the fullsize version too. Edit** They seem to be holding up just fine too, although the truck hasn't been able to get a ton of hard miles on it since we them on. (Sorting out other issues, no...
  6. MH20

    GOOD LED Flashlights

    The actual Mag-Lite branded LED bulbs are pretty good, the others are junk. I have a couple LED mags and they are much brighter than an incandescent one, and I have yet to change the batteries on one. Sure there are smaller/lighter packages available, but I kind of like the larger club-like...
  7. MH20

    Safety wiring on Off-road vehicals

    1. You can drill your own fasteners, there is relatively low stress in the head of the bolt. If you can find the fastener you need with the heads pre-drilled, buy them, they save a lot of time. 2. 1/16" 3. Use the jig i posted a link to above, it makes life very easy and you rarely brake drill...
  8. MH20

    plate bending

    Greg, try Elite they should be able to do it, and CRAIGHALL is the person you are thinking of.
  9. MH20

    manual transmission behind v8

    We're currently installing a TKO600 behind a 302 in ranger with a McLeod SFI bellhousing. We got the 0.82 road race version for the exact reasons that are mentioned above. We also have the large 1350 output u joint.
  10. MH20

    Safety wiring on Off-road vehicals

    This is the jig that you want, makes life pretty easy.
  11. MH20

    Safety wiring on Off-road vehicals

    In my opinion it is not optional on brake, hub, and steering components. That new Alpha car is taking it to the next level with safety wire on the battery boxes. It takes a lot of extra time, but shows that the person doing the prep is not taking any shortcuts.
  12. MH20

    prerunning with a tool box

    Brian, I have a set of "CLC Pit Crew" roll ups that I found at ORW for cheap (~$10), I've been looking for another one but ORW doesn't seem to have them anymore. Mastercraft makes some pretty nice ones too. We fit everything we need for a Mexico trip into 2 Mastercraft canvas bags which are...
  13. MH20

    Best Hang-Over remedy

    Drink a sports recovery drink (Endurox, etc) before going to bed. A glass of water on top of that doesn't hurt either.
  14. MH20

    BJ Baldwin VS Robby Gordon B1K 2007 Video

    Wow, some of the most impressive footage I've seen.
  15. MH20

    Mojave Trail for Lowrance?

    Here is a .gpx file that I found not too long ago that I just converted to .usr I haven't actually used this, but was planning on it soon. It's pretty detailed and appears pretty accurate when plugged into Google Earth. The .zip is only so that I can attach it here.
  16. MH20

    X bracing Chassis... PLEASE HELP

    Yeah, thats why I made you two of them. If it were my car and I planned to mount a coilover/bypass I would definitely cut off the roof, as its only six tubes. The old roof structure would take a lot of work to mount a coilover to, and the end result would be an ugly structure (IMO) with...
  17. MH20

    X bracing Chassis... PLEASE HELP

    I don't know how much work you're willing to do but here are two really quick ideas. First one is minimal modification, second one is a little more drastic. Please forgive me if I have over built it, but 99% of sand cars scare the crap out of me, due to minimal roll protection.
  18. MH20

    fuel filters for LS6

    Backwards, Aeromotive recommends the 100 micron before the pump and the 10 after the pump. BTW, we are using an Earl's -10AN 85 Micron filter before the pump instead of the 1/2 the price and has male AN fittings so you don't have to use a union to hook it to the pump.
  19. MH20

    Brand of Seat Belts?

    Our trucks have all had the padded Crows in them, but I have really liked the Deist harnesses the several times I been in trucks with them. Much less bulky than the crows.