Search results

  1. G

    Phoenix AZ recommendation for tin work?

    i need a recommendation for some tin work - need to get a firewall and fuel cell bulkhead done in our race car, there is no engine or anything just a bare chassis so its got space to work. please let me know if you know anyone good for this geoff@full-race.com is my email addy thanks
  2. G

    Good spherical Bearings/Uniballs that are cheap + durable

    I need to make some A-Arms for a road race car. What brand spherical bearing do you guys recommend that is durable and cheap? The car doesnt see crazy loads or jumping-abuse obviously, but I am sick of crappy bearings that pound out the liners. i figured you guys are the ones who could help...
  3. G

    good quality removable door bar kit?

    PERFECT!!!! thanks so much exactly what i needed
  4. G

    good quality removable door bar kit?

    Im looking to find a good quality solution for removable door bars, for a street car. I have searched quite abit and only came up with the crappy Competition Engineering junk anyone know of something nice? Thanks
  5. G

    which 2wd trans for 5VZFE toyota motor?

    I am putting a 5vz in my prerunner, and want to know what you guys recommend as far as trans goes? I was first debating, auto or manual. How durable is the stock auto trans? What is wiring like on it? Does the trans need the ecu or can it work by itself? Any idea what the older 2wd v6...
  6. G

    RC selection on RDC

    i have an rc10GT converted to brushless using a novak HV-Maxx, its a lot of fun. as fast any rc10gt and faster than most with 8 cells. Complete driveability and no maintenance and gobs of tq. it made me like RC so much more i want to build a truck using a solid rear axle (TXT) with a 4...
  7. G

    Curtis Guise Project Vehicle - Toyota T100

    Re: Project Discussion interested to see your A-arm setup. have you considered using an 86-95 4wd spindle converted to a lift spindle?
  8. G

    4runner rear susupension

    Re: 4runner rear suspension Hey Jerry, thanks for the response what length shock have you used that stays under the bed? Id rather not go into the cabin on this one. I was thinking a bilstein 7100 12" short body shock (using a 10" body) or maybe a 10" short body (in the 8" body). I...
  9. G

    4runner rear susupension

    i played with the truck this past weekend and im definately going to keep the OEM 4 link the only question i have is whetehr to ditch the coil setup and go with a set of coilovers, or to just use the stock shock mounting points and put a set of 7100 short body 12" travel shocks in there...
  10. G

    4runner rear susupension

    mine is a 94. the rear susp feels extremely "roll-ish" if that makes sense. It has so much more body roll than my old 88 with leaf springs did. id be interested to see some coil over setups from anyone who has one tho it seems that if you lifted the truck much you instant center would...
  11. G

    Toyota 3.4 swap wiring in a 3.0 truck

    thanks for the heads up jon, i used to talk to mike and dan on occasion a cpl years ago, cool guys! much appreciated
  12. G

    4runner rear susupension

    i just picked up a 4 runner today actually. i looked under it and the only thing i think worth oding is cutting all that crap off and putting some deavers under the axle.
  13. G

    Toyota 3.4 swap wiring in a 3.0 truck

    i just had to get a daily driver (my other one got smashed by a drunk/uninsured ********) so i picked up a 94 4 runner with a bad 3.0 motor i found a 3.4 ill drop in this weekend, but does anyone know what the wiring differences are? I have a 99 harness and ecu, but i may try to get a 95.5...
  14. G

    A Arms in the Rear!

    what do you mean a "bad kick", like the tail end came flying up and the nose falls? I would not expect the front to fall at all on a mid engine IRS vehicle because all the weight is in the rear
  15. G

    A Arms in the Rear!

    thats a really good point. if its gonna have a arms and a camber curve its gonna need some $$ axles. lesser setups would need to use trailing arms to get travel..
  16. G

    A Arms in the Rear!

    Fabricator -- what is the superior wheel movement that can be had with trailing arms? I would think that a camber cuve would be a good thing? In my opinion there seems to only be benefits to be had once people open their minds to IRS especially in desert racing of all off-road motorsports. I...
  17. G

    A Arms in the Rear!

    hey thom! any idea of what the scrub radius should look like in the back? It sems to me that a near-zero scrub radius would be ideal?
  18. G

    A Arms in the Rear!

    they all look like big RC10s
  19. G

    A Arms in the Rear!

    that thing looks sick. It looks like it has a lot of angle on the lowers?
  20. G

    A Arms in the Rear!

    looking at the site still not sure where you see aymar?
Top