1400 cage design

glamiskid395

Well-Known Member
Posts
787
Reaction
8
im about to build my gmc 1500 into a 1400 truck and i am not completely clear on the cage design to be SCORE legal. i know it has to be 2" .120 DOM.

if anyone has a CAD or similar drawing that is 3D, could you post it up?

thanks
Mike
 

matt_helton

Racer
Posts
3,876
Reaction
301
cagesamples.jpg
 

glamiskid395

Well-Known Member
Posts
787
Reaction
8
thanks
so the 2 pillars in the windshield aren't mandatory?
 

glamiskid395

Well-Known Member
Posts
787
Reaction
8
how many feet should i buy to be able to cage front to back. i will be cutting off the back half of the frame and do a custom cage for a 4 link.
the truck is an extended cab chevy.
say ill be using somthing similar to sample number 3
 

atomicjoe23

Well-Known Member
Posts
4,058
Reaction
72
Bend Tech will save you a lot of time (if you don't bend tube all the time that is) and will also calculate for the tube used up in the bend.

I personally believe this program is a steal at the price they sell it!!!
 

glamiskid395

Well-Known Member
Posts
787
Reaction
8
another question
on the rear, i will be cutting off the stock frame rails.
i see alot of different ways to tube it, does anyone have a good solid way i should do this? any pictures..

-mike
 
Top