Reply to thread

Message: <blockquote data-quote="rokker" data-source="post: 64308" data-attributes="member: 984">Originally I had planned on using 7/8" x 7/8" heims in 1.5 - .120  4130 w/ a 5/8" bolt then after welding the bungs in running both arms inside equal lengths of 1 3/4" .120 4130 to make the UPArms stronger - when mt heims came in, the heims were actually only 3/4" x 3/4" w/ a 5/8" bolt - question is - If I use 3/4 x 3/4 heims inside of 1 1/4 .120 4130 and than double up with 1 1/2 .120 4130 - will the 3/4" x 3/4" heims be strong enough?? Or should I really re-order the 7/8" x 7/8" heims? Recomendations please...Thanks</blockquote>