Reply to thread

Message: <blockquote data-quote="rokker" data-source="post: 64414" data-attributes="member: 984"><p>I should have worded my 2nd response differently... the individual that I spoke too actually engineered the whole truck and built 95% of it (Im just putting it together/finishing it up - making the UCArms and LCArms based on his mockups, making and mounting shock tabs etc...) he set up everything for the truck, motor mounts, transmission mount, designed the 4-link etc... he knows what engine, transmission, tires I am running and says that 3/4" x 3/4" heims are fine for the UCAs and thats what he uses on his kits. My bungs for the 3/4" x 3/4" heims fit 1 1/4 .120 tubing, he recommended that I run 1 1/2 .120 over the 1 1/4 .120 - if this is overkill thats fine - I would rather have my truck be too strong than too weak...</p></blockquote><p></p>