'94 Chevy Shock Towers

[green787]

I'm installing shock towers on my '94 Chevy for my Bilstien 7100's....

 

[green787]

Got them done... had to reverse angle on the right side hoop for clearance issues so I can remove the engine easily....

 

[green787]

Drilled out the chassis spring towers with 3 1/2" hole saw for the Bilstein 7100's to reach down to the lower control arm...

 

[michael.gonzalez]

The green swaybar is a nice touch.

 

[green787]

Front end is done, now for the rear....

 

[green787]

I'm installing shock towers on my '94 Chevy for my Bilstien 7100's....View attachment 245921

I decided I didn't like the angle on the driver's side and reversed it to match mirror image to the passenger side.....

 

[green787]

Last night I started on the rear shock hoops... Actually just re-working an old rear shock hoop from a Toyota Tacoma I had laying around for years.... Tonight I'll put the dimple die cross piece back in.... The hoops are a little "floppy" without it....