Camburg's new KINETIK brake pedal

Jerry Zaiden

Well-Known Member
We've built the better mouse trap with our Camburg/KINETIK brake pedal kit. Our brake pedal is 18" long so we've corrected the pivot points and motion ratios for the correct geometry with our mounting bracket. Most aftermarket pedals are just too short for the braking power needed with off-road trucks. These are built from laser cut 4130 chromoly, TIG welded and then satin nickel plated for corrosion resistance. The pedal pivots on bearing bronze bushings and is attached with AN bolts with the correct grip/shoulder lengths and hardware. These are a reverse swing design setup to use Jamar, Tilton or CNC master cylinders and balance bars.

This is the same pedal assembly used in our KINETIK race trucks.






Well-Known Member
How do mount it in the vehicle? I don't see any bolt holes.