Cycling leaf springs

The_Hulk

Member
Posts
21
Reaction
0
When cycling leaf springs should I take the leaf pack apart and only use the top leaf to cycle with? Any help will be useful...Thanks
 

havahockey

Flipper
Posts
3,145
Reaction
724
I would cycle it with the top two leafs. You can droop out a leaf pack with all the leafs on it but bottoming it out will be tough. WIth just the two leafs all you need is a couple people to sit on it.
 

Kritter

Krittro Campbell
Posts
10,914
Reaction
296
Use only the main leaf and make a block to replace the lost height of the rest of the removed leafs...usually the block will be about 2 - 3 inches. This way you have easy cycling with only jack and have somebody step on the housing for full droop. Watch your brakelines!

Kris
<A target="_blank" HREF=http://www.dmsrace.com>www.dmsrace.com</A>
"Jesus loves you, everybody else thinks you're an A-hole"
 
Top