E40D shifter

In_the_works

Well-Known Member
Posts
305
Reaction
0
I was wondering if anyone has swapped out their on the column shifter for an on the floor type? If so, how difficult is it? I've been on the B&M and Hurst sites, and they only offer floor shifters for C-4s and AOD trannys. Would either of these work for an E4OD?

'96 F-150 4x4 ex cab
'02 Maico 250
'03 Sonoma
Look at me! I'm a member.
 

properprerunner

Well-Known Member
Posts
53
Reaction
0
I put an Art carr (winters) shifter in my 96' ranger. You have to remount the contact switch for the over drive and make a bracket to hold the cable to the transmission pan. You also need to disconnect the switch in the steering column than tells your truck that it is in park so you are able to start it. you may also have to make a new shifter gate plate so 1st, 2nd,ect. are in the correct spots.
 

motoxscott

Well-Known Member
Posts
1,240
Reaction
299
Art Carr has them available for the E4OD transmission. I know you can get them from Baja Concepts, Race Ready or through Art Carr direct. You just need to mount a switch for the OD button.
 
Top