Engine porn

Slippery P

Well-Known Member
Joined
Dec 8, 2007
Posts
2,959
RDC Crypto
3,608
Location
Valley Center CA.
One of the coolest engines I have had the privilege to put my grubby hands on. Ex TRD Triad NASCAR engine. We put twin hair dryers on it for Dondelā€™s TT. Made a lot of power and reved to 9500, but The timing belt wasnā€™t up to the task, you could set a timer on it 150 miles and KAPOW!!
96472371-2C6E-40F2-B4FB-842EA011C704.jpeg
FC23A053-AE49-4B6F-A100-484C1D91B757.jpeg
4B563206-009D-4B4E-AA6F-9E9970145A83.jpeg
8B4810F3-9F34-4343-BDCE-E203E7569446.jpeg
E841EF23-100F-473A-9E0B-21A8587555D9.jpeg
47F67E84-F44E-46AD-9AF4-1A4F184EBA86.jpeg
 

jon coleman

Well-Known Member
Joined
Jan 17, 2019
Posts
11,789
RDC Crypto
7,213
Location
sandiego
paper towle ALERT( i dig those ' knife edge' cranks, bet that can get a 1/4 mph faster at Talladega
 

Attachments

  • th (24).jpeg
    th (24).jpeg
    7.8 KB · Views: 0

Slippery P

Well-Known Member
Joined
Dec 8, 2007
Posts
2,959
RDC Crypto
3,608
Location
Valley Center CA.
Why not taper wall pins? Seems like a good place to loose weight without sacrificing strength.
It had light weight pins in it, but we boosted the poop out of it so needed the heavy duty pin upgrade. DLC coated as you can see there was no bushing in the pin bore.
 

Slippery P

Well-Known Member
Joined
Dec 8, 2007
Posts
2,959
RDC Crypto
3,608
Location
Valley Center CA.
Finished up this bad dog today for a certain Mason AWD.
C29E0BED-131C-44B9-A849-3868D6043E56.jpeg
165CEDC5-CD83-40D8-ABFE-F8A79D86319E.jpeg
67D132C3-8F3D-469F-80EA-0D2B934CD657.jpeg
51463D22-4B82-4977-8338-785DF3731C2C.jpeg
 

Slippery P

Well-Known Member
Joined
Dec 8, 2007
Posts
2,959
RDC Crypto
3,608
Location
Valley Center CA.
Big block fuel injected manifold building I have a love hate relationship with. I love porting & building them and the finished product is always satisfying. Hate the result of being covered in aluminum chips all week long.
2B1CADF7-E663-4D93-8E1E-85D91FD7BC85.jpeg
6B91DC77-A9B3-49B1-B382-1AF522712E9B.jpeg
C2F1ACFA-BE21-4CB9-A699-A69057845680.jpeg
F9EF99BB-DB5E-43BE-AF89-6A75EBAC76CA.jpeg
F232C764-8579-455C-B614-9A9A56D85428.jpeg
8B5D6F4B-C175-45B3-A859-EDE2F3F5BD0F.jpeg
191FB566-557B-4479-ACC3-1C0DDA9286B7.jpeg
 

Slippery P

Well-Known Member
Joined
Dec 8, 2007
Posts
2,959
RDC Crypto
3,608
Location
Valley Center CA.
We did this Gen 5 LT1 3 or 4 years ago, since then we have done multiple different variations of it. This particular one made 760hp 654ftlbs of torque on 91 pump gas with our hand ported cylinder heads as there were no CNC programs for them then. Very impressive power plant I really like this engine platform.

F9B77A96-FBAA-4013-A9D9-EB859AA8E523.jpeg
EA806243-9F36-4D05-B65E-76AF012AD66F.jpeg
D3164421-432A-42B1-BF6C-9B74970E8FEE.jpeg
9E9EBA38-C68A-46DB-96FA-C725432DC814.jpeg
 

Slippery P

Well-Known Member
Joined
Dec 8, 2007
Posts
2,959
RDC Crypto
3,608
Location
Valley Center CA.
Any Toyota engine porn?
Only the TRD Triad NASCAR engine a few posts back that we did for Dondelā€™s TT a few years ago.
 

scottm

Well-Known Member
Joined
Feb 7, 2005
Posts
1,908
RDC Crypto
603
Location
scottsdale AZ
Website
www.cemaz.com
Is that gen 5 direct injection?
 

Slippery P

Well-Known Member
Joined
Dec 8, 2007
Posts
2,959
RDC Crypto
3,608
Location
Valley Center CA.
So nice Who makes the plate for all the sensors on the danzio motor
Thank you! The sensor plate on the Big Blocks that bolts under the throttle body, we make. We have them for BBC 4500 and SBC 4150 bolt patterns. Itā€™s actually a piece that Leon Patton came up with decades ago. It houses the pressure sensors, fuel pressure regulator, -8 tee to feed the fuel rails, MAP sensor, and we have designed a new plate pictured on the manifold a few posts ago so that we can mount our custom drive by wire motor to it as well.
 

TrophyBurro

Well-Known Member
Joined
Apr 11, 2018
Posts
214
RDC Crypto
247
Location
Cabo san Lucas
Thank you! The sensor plate on the Big Blocks that bolts under the throttle body, we make. We have them for BBC 4500 and SBC 4150 bolt patterns. Itā€™s actually a piece that Leon Patton came up with decades ago. It houses the pressure sensors, fuel pressure regulator, -8 tee to feed the fuel rails, MAP sensor, and we have designed a new plate pictured on the manifold a few posts ago so that we can mount our custom drive by wire motor to it as well.
Looks awesome and really clean place to locate them all :)
 
Top