equal length beams

justin meyers

Active Member
Posts
25
Reaction
0
i just installed a giant equal length kit and cant seem to get the wheel base squared away! its the new style (prism), D35, and im at the point where in order to get it squared up i would be hacking up my engine crossmember. by the way its a 94 ranger.

the passenger beam is 1 1/2 inch closer to the cab than the drivers side. is this normal? ive tried calling giant the last two days but no answer. someone help


thanks justin:confused:
 

philofab

Powered by Optima
Posts
1,921
Reaction
407
I talked to Geoff at Giant today. Give him a call, he will get your problem figured out. If it's a wheelbase issue it will be fixed by radius arm mount location. Engine x-member would cause it to have different track width from side to side.
 

Prerunin554

Well-Known Member
Posts
639
Reaction
41
You might need to take out some of the lip of the engine crossmember. I dont have equal length beams, but i pushed my beams forward 2" and had to cut some of the crossmember out for everything to fit correctly.

Have you tried to send him a PM on here?
 
Top