Reply to thread

Message: <blockquote data-quote="rdc" data-source="post: 10726" data-attributes="member: 2"><p>My friend and I are going to start building my a arms on my f150.  Going to be 6" per side wider.  The bottom arm is going to use the stock pivot points.  For the upper we are going to make a J arm.  Everything will be heimed.  Everything is going to be boxed in.  Going to run a uniball instead of the ball joint.  Going to heim the steering and going to run a King coil over w/ an airbump w/ limit straps.  Does this sound good for a set up?  Trying to get around 15" of travel, i wouldn't complain if i got more.  Does anyone have any pics of there set up as far as a  arm mounting?  Any help will be great.   thanks Jason</p></blockquote><p></p>