Fab Work

wnt2bercr

Member
Posts
22
Reaction
0
Looking for a good fabricator. After reading the post below...I dont want that dude.

I have a CJ-7 that I would like to do suspension on (old school class 3) all leafs around etc.

I have seen many old photos with jeeps/broncos/blazers etc. that used to tear it up.

Is there still a Faber around that specializes in these rigs still? if any one can help me I would appreciate it. Or if you have pics please forward them.

Thanks,
 

ntsqd

Well-Known Member
Posts
2,429
Reaction
27
Would help to know where you're located.

TS

I used swerve around my halucinations, now I drive right thru them.
 

Tony_Barraza

Well-Known Member
Posts
2,021
Reaction
103
JJ-

Give Dave Turner in Hemet a call. He has a ton of experience with Jeeps and other vehicles with limited travel. He's an excellent fabricator, and a cage would be no problem at all for him.

He has been the lead fabricator/mechanic/driver on the ACE Motorsports Stock Explorer, and has been doing alot of work with JeepSpeed vehicles. In addition to all this, he has been heavily involved with various Rally series', and has constructed many top contending Rally Cars/Trucks. He recentley completed the Saturn Vue that Craig Turner and GT Motorsports will run in 2003.

His contact info is as follows:

Dave Turner Motorsports
301 W. Esplanade Avenue
Hemet, CA 92544
909/487-5944
dtmotorsports@juno.com

Tell him I sent ya!

Tony B.

"Get Creative!"
 
Top