• Forum membership has its advantages....

FORD 9"

JOSH

Well-Known Member
FORD 9\"

I just went and picked up my rear end, its out of a 1974 f100
Could anyone tell me if it is "Big Bearing" or "Small Bearing"
and any other info you might have

Thanks
Josh
 

geoff

Well-Known Member
Re: FORD 9\"

pull it apart, it took me 20 minutes. You will also know how many splines its got (28 or 31). to find your stock gearing, turn the pinion manually, and count.

Mathmatics is the language of nature.
 

rdc

- users no longer part of the rdc family -
Re: FORD 9"

You have to check out the Housing end dimensions. A large bearing Ford rear end will have 1/2 inch bolt holes. A small bearing Ford rear end will have 3/8 inch bolt holes. Large bearing the measurement from the left top bolt hole to the right top bolt hole horizontally will be 3 1/2 inches. Small bearing the measurement from the left top bolt hole to the right top bolt hole horizontally will be 3 5/16 inches.

Or you can just call Currie Enterprises. 1-714-528-6957. They can look it up and tell you in a matter of seconds. However you might have to wait on the line for a while.

Eric
 
Top