Harness mounts

J_Dog

Well-Known Member
Posts
610
Reaction
3
We need to change our mounts and were wondering if these were within the rules. I don't have my SCORE rulebook, but did check B.I.T.D.'s rules and it was not clear. Wanted to know if these snap-in type of mounts were within the rules or do they need to be the bolt-in style? Thanks.
 

Attachments

drtdevil93

Well-Known Member
Posts
1,769
Reaction
11
99% sure they are legal. i opted to cut the bolt part off and weld the eyelet in to the cage. better than drilling a big 'ol hole in my cage

erik
 

Kritter

Krittro Campbell
Posts
10,914
Reaction
296
They are legal, but you must safety wire that little hole to make them legal.
 

desertracer

Well-Known Member
Posts
2,073
Reaction
31
On our car we just cut the threads off and welded them into our cage at the desired points. We use the clip in simpson belts with a cotter pin to keep them locked in and we have been fine in tech with this set-up.
 

Bill

Carlos Danger
Posts
6,477
Reaction
157
in my old 7-s truck I drilled the hole but welded both sides not using the nut and washer for double the protection
 

J_Dog

Well-Known Member
Posts
610
Reaction
3
Thank you all for the replies.
 
Top