Help Please. Shop Press not Pressing

motoman29

Well-Known Member
Posts
756
Reaction
131
I was using my buddy's Ramco RP50 today. I was a complete dumbass and loosened the valve all the way and it came out showering me with oil. I put it back in and proceeded to fill where the petcock is with oil. Realizing that this was probably not correct, I filled the fill hole all the way. Now When I pump it on either side, it goes a bit and then goes back.

I drained out as much oil as I could, and then just refilled the correct side. It still does the same thing.

Help, how do I solve this situation?

Thanks.
 

Jerry Zaiden

Well-Known Member
Posts
9,843
Reaction
1,167
Check to see if you lost the spring and check ball....
 
Top