Jack Stands

JOSH

Well-Known Member
Posts
245
Reaction
4
Anyone know where i can get a couple of high lift Jack Stands? I need around 35-40" of lift...
Thanks
 

sirhk100

Well-Known Member
Posts
2,797
Reaction
678
Nope, but I love your picture!!!!

'92 Ford Exploder (AKA Dezert Limo cause it's loaded)
 

JOSH

Well-Known Member
Posts
245
Reaction
4
Yeah, i get quite a "lift" out of it
 

cleartoy

Well-Known Member
Posts
956
Reaction
0
I know what you mean. Pep Boys stands and blocks of wood only get ya so far!

Im thinking about building some today out of 2x2 square .120 or .250 wall.

94 Toyota stdcab 2x4
99 Yamaha YZ250

Got Sand??
 

DMSRACE

Well-Known Member
Posts
1,300
Reaction
1
McMaster Carr has screw jacks....they will do all that you need..run @ $125.00 each


Kevin

Racer

To live life half throttle would be a waste....
 

tedmales

Well-Known Member
Posts
541
Reaction
10
napa sells a set that get pretty high, but they are about $300.

life is too short to be small
 

JOSH

Well-Known Member
Posts
245
Reaction
4
Can you get me a part number for those screw jacks?

Thanks
 

Kritter

Krittro Campbell
Posts
10,914
Reaction
296
Base 8732T32


Head 8732T65


Kris
<A target="_blank" HREF=http://www.barneysprecision.com/fabproducts.htm> Fab Parts</A>
 

motoxscott

Well-Known Member
Posts
1,240
Reaction
299
Hey Kris or Kevin (DMS guys),

Do you guys use those stands from McMaster (the ones Kris has pictured), if so are they pretty stable? If you throw 4 of those under a fullsize is it good to go, that high in the air?


-Scott
 

Kritter

Krittro Campbell
Posts
10,914
Reaction
296
Yes they are sweet..best stands you can get for propping up a race car....put it on the bumpers and strip it down with no obstructions

Kris
<A target="_blank" HREF=http://www.barneysprecision.com/fabproducts.htm> Fab Parts</A>
 

1992f150

Well-Known Member
Posts
373
Reaction
0
they are also called pipe stands, use them like saw horses.

Azusa: shame of the foothills
 

shrek

Well-Known Member
Posts
1,342
Reaction
60
The pipe stands are the only way to go. It is by far the best way to prep a race-truck. You can put it up high, climb on it, hammer on it and it does not even think about moving.

We got ours from a sponsor, but he bought them from McMaster Carr also.

Shrek

Value your right to say whatever you want...........because there are some that can't.
 

motoxscott

Well-Known Member
Posts
1,240
Reaction
299
Well I ordered 2 sets from McMaster so I'll let you know how they work out. The stands were $55.20 ea. and the heads were $53.80 ea. If I like them I'll order up 2 more.

-Scott
 
Top