manual ranger cable?

singlehanded

Well-Known Member
How do I get this clutch cable dissconnected its really making this swap painful?Help

midnight landscaper working overtime and I'm full throttle I'm full throttle tonight<P ID="edit"><FONT SIZE=-1>Edited by singlehanded on 01/25/03 09:37 PM (server time).</FONT></P>
 

singlehanded

Well-Known Member
pic.

midnight landscaper working overtime and I'm full throttle I'm full throttle tonight
 

AaronDixon

Well-Known Member
Just push the plastic collar ring into the transmission. There is an internal ring with some teeth on it that hold the line in. After you push the plastic ring all the way in, this should disengage the retainer ring and you should be able to pull the line right out. No mess either because there is a valve that closes when you take the lines apart.
 

singlehanded

Well-Known Member
Thanks you rock took me 5 min to get it off this morning when I started working on it again.

midnight landscaper working overtime and I'm full throttle I'm full throttle tonight
 
Top