crafty
Well-Known Member
- Posts
- 203
- Reaction
- 229
Please explain 1slapper. Photos?
-
Forum membership has its advantages....
Norra Legend Trucks, bypass shocks
- Thread starter BajaJT
- Start date
partybarge_pilot
Well-Known Member
- Posts
- 6,599
- Reaction
- 1,422
Like this only with 1 or 2 2" shocks.
The shocks have almost zero rebound damping and a lot of compression. Enough pressure to make them return. Normally you would have a poly bumpstop mounted to the bottom of the arm so that it doesn't make so much noise when it hits. Slapper arm ends can also be attached to the A-arm itself instead of the frame. Makes figuring out the pivot point a non-issue.
The shocks have almost zero rebound damping and a lot of compression. Enough pressure to make them return. Normally you would have a poly bumpstop mounted to the bottom of the arm so that it doesn't make so much noise when it hits. Slapper arm ends can also be attached to the A-arm itself instead of the frame. Makes figuring out the pivot point a non-issue.