• Forum membership has its advantages....

Raceair Wiring??

Chris

Well-Known Member
#1
I just bought a pci raceair pumper for my new rzr but I’m completely useless when it comes to wiring. But I can follow instructions well enough. Can someone give me a single line diagram for how I should wire this thing up? Many thanks.
 

Fourstroker

Well-Known Member
#2
If pumper has 2 colored wires, connect the black wire to the chassis or other ground and connect the red wire to your on/off switch. Other side of your switch to battery or power block.

If both wires are same color, one to ground and one to switch.
 

Chris

Well-Known Member
#3
Both wires are same color. Fuse between switch and battery - what size? And should I use a relay or can I wire the switch directly to the oem busbar without a relay? Also what gage wire should I be using?
 

Fourstroker

Well-Known Member
#4
I would add a 10/15 amp fuse between battery/oem busbar and switch. No relay required. match wire size on the pumper. Guessing 16 or 18 gauge
 

AZFR8TRAIN

Well-Known Member
#7
PCI. Is very helpful and there are usually videos of install as well. But looks like dan200 and fourstroker have it figured out for ya


Sent from my iPhone using race-deZert
 
Top