1. Forum membership has its advantages....
    Dismiss Notice

Ranger 4x4 hubs

Discussion in 'Shop - Miscellaneous' started by Skyler, Sep 19, 2001.

  1. Skyler

    Skyler Well-Known Member

    Joined:
    Apr 2, 2001
    Location:
    Phelan(p-town), CA
    I have got a 91 ranger 4x4, with a dana 35 in front and I can't seem to keep the spindle nuts tight on it. I have got the Warn upgrade kit on the spindle nuts and it still backs off. At Primm while pre-running the hubs got so lose that the brake pad fell out of the caliper and the brakes stopped working, I ruined a caliper and ground a bunch of metal off from inside the rim. It's getting kind of old having this happen and i was wondering if any of you have got a fix for this. Thanks
     
    Skyler, Sep 19, 2001
    #1
  2. rdc

    rdc - users no longer part of the rdc family -

    Joined:
    Dec 31, 1969
    rdc, Sep 19, 2001
    #2
  3. Skyler

    Skyler Well-Known Member

    Joined:
    Apr 2, 2001
    Location:
    Phelan(p-town), CA
    Thanks for the link, that kinda sounds like the setup that is on a linkpin frontend on a VW, luckily I have a friend who works at a jeep dealer so I should be able to get the parts new- thanks again
     
    Skyler, Sep 19, 2001
    #3
  4. Mike_HKmtrsprts

    Mike_HKmtrsprts Well-Known Member

    Joined:
    May 3, 2001
    Location:
    Murrieta
    I put the same warn kit on my brothers 4x4 ranger and they have worked perfectly for about 4k mi. now,Im not doubting your mechanical ability or trying to be smart but you are using cotter keys right?

    You must be Fast cuz I was HAULIN ASS when I passed you...
     
    Mike_HKmtrsprts, Sep 19, 2001
    #4
Verification:
Draft saved Draft deleted

Share This Page