Ranger I beam Questions

justin meyers

Active Member
Posts
25
Reaction
0
this question isnt referring to any company... but has anyone ever had a problem with the joint/bolt breaking where the radius arm joins the Beam? I plan on running a coil-over directly off the top of the beam, and a bypass off the front face of the beam. How much load is on that particular joint (radius arm to beam)? i think i tend to have "ocd" when it comes to dealing with suspension so bare with my questions please. btw these are equal lengths on a ranger thanks in advance


justin:eek:
 

F1shifty

Well-Known Member
Posts
59
Reaction
1
my f-150 i mounted the c/o slightly behind the beam with gr8 hardware and i havent had any problems. i also have 9/16 plate on my radius arm after bending 3/8.. its 4x4 with 35's and 4.56's too so theres quite a bit more tourqe on the arms. just use the right hardware. ive seen ranger frames bend after stuffing it into something and those bolts are still together. im not saying it cant be done but...ya
 
Top