Reply to thread

Message

<blockquote data-quote="Timberwlf" data-source="post: 24254" data-attributes="member: 276">Hi AllOk heres a question for you guys..Ive got a 94 Ranger 4x4 with the added weight of a 5.0 up front..Currently my front setup is stock TTB and x-tented radius arms with 14 in coilovers (350 over 400)..the 4wd is disabled on this truck due to lack of transfer case etc. the front is currently limited to 15in travel. So here comes the question...I will probally never go back to 4x4 so Ive been thinking about a set of 2wd beams up front instead of the TBB system.1. Will standard 2wd beams bolt up to the stock 4wd locations properly??2. it seems that standard bent beams have a 5.5in lift on them do they have beams with only a 3.5in&nbsp; &nbsp; &nbsp;&nbsp; lift? I ask this beacuse the truck has a stock 2in lift due to being 4wdAny other opinions and options would be Great =)Thanks in AdvanceBrandon94 Ranger X-Cab 4x4 5.0 H.O. v-8&nbsp; Pre-Runner/ Chase Truck</blockquote>

[QUOTE="Timberwlf, post: 24254, member: 276"] Hi All Ok heres a question for you guys..Ive got a 94 Ranger 4x4 with the added weight of a 5.0 up front..Currently my front setup is stock TTB and x-tented radius arms with 14 in coilovers (350 over 400)..the 4wd is disabled on this truck due to lack of transfer case etc. the front is currently limited to 15in travel. So here comes the question...I will probally never go back to 4x4 so Ive been thinking about a set of 2wd beams up front instead of the TBB system. 1. Will standard 2wd beams bolt up to the stock 4wd locations properly?? 2. it seems that standard bent beams have a 5.5in lift on them do they have beams with only a 3.5in lift? I ask this beacuse the truck has a stock 2in lift due to being 4wd Any other opinions and options would be Great =) Thanks in Advance Brandon 94 Ranger X-Cab 4x4 5.0 H.O. v-8 Pre-Runner/ Chase Truck [/QUOTE]

Verification