Reply to thread

Message: <blockquote data-quote="Jerry Zaiden" data-source="post: 24261" data-attributes="member: 5">1. Will standard 2wd beams bolt up to the stock 4wd locations properly??-----NO2. it seems that standard bent beams have a 5.5in lift on them do they have beams with only a 3.5in lift? I ask this because the truck has a stock 2in lift due to being 4wd---I would not suggest going through this much work and running stock bent I beams. Even with your Coil-overs.The next questions are. 1) How much do you want to spend?2) Where do your coilovers mount, the I beam or the Radius arm? If you change to 2WD beams your radius arms will be to wide where they bolt to the I beams. You could run a spacer but i do not suggest them.</blockquote>