Stella "Bracket kit" for the 1000?

EZinAZ

Well-Known Member
Posts
55
Reaction
49
Getting the run around from Anube Sport.

Puchased the bracket kit 3 weeks ago...
No response for 3 weeks and then i'm told they are short on parts and hope to have them in about 10 days... If not they should have them in Ensenada just prior to the race.

My anxiety will not allow me to wait until the last minute to do this.

Anybody have a bracket kit they'd be willing to sell me?
We're on a moto.
 

Chainguide

Well-Known Member
Posts
405
Reaction
361
Getting the run around from Anube Sport.

Puchased the bracket kit 3 weeks ago...
No response for 3 weeks and then i'm told they are short on parts and hope to have them in about 10 days... If not they should have them in Ensenada just prior to the race.

My anxiety will not allow me to wait until the last minute to do this.

Anybody have a bracket kit they'd be willing to sell me?
We're on a moto.

Contact Dennis at DMG precision (714) 557-3674 for a handlebar mounting kit for the Stella bracket if you don't already have that part dialed in yet. (Stella bracket not included)
 

MAC FAB

Well-Known Member
Posts
67
Reaction
78
Hit up a sheet metal shop near you. I just looked at the basic brackets, doesn't appear to be that big of a deal at first glance. Maybe I should start making these....
 

desertspeed

Well-Known Member
Posts
673
Reaction
342
Getting the run around from Anube Sport.

Puchased the bracket kit 3 weeks ago...
No response for 3 weeks and then i'm told they are short on parts and hope to have them in about 10 days... If not they should have them in Ensenada just prior to the race.

My anxiety will not allow me to wait until the last minute to do this.

Anybody have a bracket kit they'd be willing to sell me?
We're on a moto.

I'm in the same boat- ordered it a month ago and I haven't seen anything. I was going to try to follow up with them today. I will post up here if I find anything out.
 

EZinAZ

Well-Known Member
Posts
55
Reaction
49
Contact Dennis at DMG precision (714) 557-3674 for a handlebar mounting kit for the Stella bracket if you don't already have that part dialed in yet. (Stella bracket not included)

Just got off the phone with Dennis.
It's not the Stella Kit but should make installing it on a moto much easier.
Thanks for the referral.
 

Phoenix0783

Well-Known Member
Posts
175
Reaction
92
We've also been waiting a few weeks for our kit to arrive. Emailed them a couple days ago and nothing.
 

Jessaca

Well-Known Member
Posts
153
Reaction
66
If you guys hear anything, please post. I am also waiting. Haven't heard anything from them.


Sent from my iPhone using race-deZert
 

51rcr

Well-Known Member
Posts
792
Reaction
470
I emailed awhile ago and got a number for Jorge In Ensanada. Didnt sound like they would be in in time to still get shipped. Said it would be best to do them there. I was thinking same thing. It would be nice to have it done and not have much to worry but dont want it showing up after we left.
 

Baja Dad

Well-Known Member
Posts
241
Reaction
239
HA HA HA :eek:
I made my own and it is bullet proof
Race tested in the SF 250 and Crashed tested at the 500
dose not stick up in the air

good luck
 

JaysinDesignz

Well-Known Member
Posts
671
Reaction
265
Racers can build amazing machines to race the Baja 1000 from scratch.
$40 bracket stumps them...
 

desertspeed

Well-Known Member
Posts
673
Reaction
342
Racers can build amazing machines to race the Baja 1000 from scratch.
$40 bracket stumps them...

We are required to buy the installation/bracket kit. We have 1,000's of other little details we are trying to get done, and we took the time to order it 3 months before the race. They were perfectly happy to take our money........

It is an additional thing we need to worry about/take care of in Ensenada at the last minute. It has nothing to do with our ability to fabricate a bracket........
 

EZinAZ

Well-Known Member
Posts
55
Reaction
49
Here is what the Stella Motorcycle mount looks like

Will your mount work with flex bars?
I'm wondering if it'll fit above and inside the flex bars cross bars.
 

Baja Dad

Well-Known Member
Posts
241
Reaction
239
Will your mount work with flex bars?
I'm wondering if it'll fit above and inside the flex bars cross bars.
make a plate that goes from front crossbar to back crossbar then BOLT the Stella Bracket to it

should cost you about $10 and an hour of your time.
 

EZinAZ

Well-Known Member
Posts
55
Reaction
49
make a plate that goes from front crossbar to back crossbar then BOLT the Stella Bracket to it

should cost you about $10 and an hour of your time.

Great idea,.... sometimes the simple solutions are the hardest to think of. :)
 

GOINRACIN

Well-Known Member
Posts
157
Reaction
34
Ordered ours back on September 20th. Have sent multiple emails trying to get the status of our order, no replies.
Does anyone have a Telephone number for Anube?
 
Top