Tig welding video

FabioP

Well-Known Member
Posts
143
Reaction
1
Found this on Youtube. Is this good information?

[video=youtube;i3J0GE_c9K8]http://www.youtube.com/watch?v=i3J0GE_c9K8[/video]
 

tomahawkracefab

Well-Known Member
Posts
157
Reaction
55
Found this on Youtube. Is this good information?
I dont think so! , man! have u asked the wrong question in the wrong place! his tungsten movement and material feed are erratic and looks like he's melting filler away from pool instead of dipping filler into pool..each to thier own i suppose....:D where's my popcorn and deckchair? lol
 

weldithot79

Well-Known Member
Posts
166
Reaction
11
This guy isnt the smoothest, but tig welding of heavy wall and large diameter piping is way different than welding tubing. His technique is pretty standard for industrial applications.;)
 

FabioP

Well-Known Member
Posts
143
Reaction
1
Didn't know what to say since I have 0 experience on TIG welding. I was trying to find a video showing the "action" and that's what I came up with.
 

loufish

Well-Known Member
Posts
801
Reaction
113
I watched several of his vids...I believe this is the root pass, and because it's heavywall pipe you're going to need more tungsten out there to get to the bottom of the bevel...

It's interesting, but doesn't apply to many of the requests for race car welding videos...
 

KOH427

Well-Known Member
Posts
86
Reaction
10
Probably using a gas lens for the tungsten to stick out that far.

It would have been nice to see the weave when it was done.
 
Top