Reply to thread

Message: <blockquote data-quote="Sheepdog" data-source="post: 2021211" data-attributes="member: 61241">The 35" 315/70R17 load range "C" KO2s that come stock on the Raptor, would actually be the next step up for us, if I could figure out some kind of cut-out fender flares. I would only need about another inch of height in the front fender openings, and the rear may clear them as-is. The only other thing I'd need, would be a deeper ring & pinion set for the rear diff. Something around 4.25:1 would be good.But all the Raptor take-offs I see, are being sold with wheels and/or are used to the point that I'd have no use for them. And the asking prices are ridiculous.</blockquote>