On Topic TTB and Wheel Alignment Qs

KiwiMike

Well-Known Member
Posts
65
Reaction
3
Hi Guys
Running a TTB front end. Bronco chassis. (Was 4wd but is only 2wd now) The truck is very twitchy at medium speed and higher. esp on slippery surfaces. (On good traction tracks not so noticeable, and takes higher speeds to notice) Almost like we have neutral or toe in on the wheel alignment.
Currently we are running very slight Toe out. But I am thinking we need a little more.
Does anybody have experience with figuring how much toe out to run?

Thanks.



Sent from my iPhone using race-deZert mobile app
 

Moss2

Well-Known Member
Posts
460
Reaction
166
I have experienced the opposite of your direction. On a 2wd rear drive everything I've had always has gotten more unstable with toe out when trying to go straight. It helps on turning sometimes depending on your geometry with some toe out. TTBs can change toe a lot at different points in the travel. If its worse accelerating or braking that may point you in the direction you need to look.
 

Giant Geoff

Well-Known Member
Posts
725
Reaction
91
Towed in 1/8" with 18* of caster will make it solid as a rock!
 

Attachments

  • 11954696_1104022596282439_5286460105430446085_n.jpg
    11954696_1104022596282439_5286460105430446085_n.jpg
    75.5 KB · Views: 132

KiwiMike

Well-Known Member
Posts
65
Reaction
3
Thanks guys. We will have to have a play.


Sent from my iPhone using race-deZert
 
Top